HU250 Universal Milling Machine
Main Features
HU-250 comes equipped with both horizontal and veritcal spindles on one milling machine, making it possible to work on both vertical and horizontal faces of a workpiece without moving it and repositioning it on the table. In addition, the table can swivel 45º left to right, making precise angular milling and drilling a cinch. Both X- and Z-axis are motorized to allow rapid positioning of the workpiece to the cutting spindle. X-axis Gearbox PowerFeed also has 6 selectable feed rates to simplify milling operation.
Standard Accessories
- Vertical Head Attachment
- Coolant Equipment
- X Axis Gearbox PowerFeed
- Table Elevating Motor
- Table Swivel
- Tools and Toolbox
Specifications
| Model Name | HU-250 | |
| Table | Size | 9.84” x 43.31” |
| T-Slot | 0.63” width x 3×2.36” pitch | |
| Swivel (Left & Right) | 45º | |
| Nose to Table (Vertical Spindle) | 0 ~ 13.46” | |
| Travels | X Y Z | 27.56” x 10.24” x 15.35” |
| Feed Rate | X Axis Feed Rate | 0.87 ~ 15.12 ipm (6 steps) |
| X Axis Rapid Traverse | 49.21 ipm | |
| Z Axis Rapid Traverse | 15.35” | |
| Vertical Spindle | Spindle Nose | NT 40 |
| Spindle Speed | 70 ~ 1320 rpm | |
| Spindle Steps | 6 | |
| Horizontal Spindle | Spindle Nose | NT 40 |
| Spindle Speed | 70 ~ 1320 rpm | |
| Spindle Steps | 6 | |
| Center to Bottom of Ram | 4.53” | |
| Center to Table | 0 ~ 15.35” | |
| Motor | Spindle Motor | 3 HP |
| X-Axis PowerFeed | 3/4 HP | |
| Z-Axis Table Elevating Motor | 1/2 HP | |
| Coolant Pump | 1/8 HP | |
| Size | Machine L x W x H | 61.81” x 48.43” x 65.04” |
| Net Weight | 2420 lbs | |
| Gross Weight | 2750 lbs | |
| *Specifications are subject to change without notice | ||