22000G / 26000G Series
Precision High Speed Lathe
SPECIFICATIONS
| Model | 22000G | 26000G |
| Swing over Bed | 22" | 26.2" |
| Swing over Cross Slide | 13.39" | 17.32" |
| Center Distance | Available: 39", 59", 79", 98", 118", 157" | |
| Swing over Gap | 31.02" | 35.04" |
| Bed Width | 15.75" | |
| Spindle Nose | D1-8 for 3.23" spindle or D1-11 for 4.53" spindle | |
| Spindle Bore | 3.23" or 4.53" | |
| Taper of Spindle Bore | MT 7 | |
| Spindle Speed | 15 ~ 1500rpm (12 sep) for 3.23" spindle or 10 ~ 1000 rpm (12 step) for 3.23" spindle |
|
| Inch Threads Range | 2 ~ 56 TPI | |
| Metric Threads Range | 0.5 ~ 14mm | |
| Longitudinal Feeds Range | 0.0020 ~ 0.0323 ipr | |
| Cross Feeds Range | 0.0008 ~ 0.0157 ipr | |
| Leadscrew Diameter | 1.5" | |
| Leadscrew Pitch | 4 TPI | |
| Taper of Tail Center | MT 5 | |
| Tailstock Quill Travel | 6.5" | |
| Tailstock Quill Diameter | 3.35" | |
| Main Drive Motor | 15 HP | |
| Coolant Pump | 1/8 HP | |
| Compound Rest Travel | 7.87" | |
| Cross Slide Travel | 14.76" | |
Standard Accessories
- 4-way tool post
- Centers
- Back plate
- Rapid traverse (for models with greater than 98" distance between centers)
- Safety pin
- Screw wrench for cutter setting
- Rear splash guard
- Coolant system
- Auto-feed stopper ring
- Tool box
Optional Accessories
- 3-Jaw scroll chuck
- 4-Jaw independent chuck
- Face plate
- Steady rest
- Follow rest
- Work light
- 4-position carriage stop
- Micro carriage stop
- Live centers
- Rear cutter rest
- Taper turning attachment
- Rapid traverse (for models with greater than 98" distance between centers)
- Chuck guard
- American toolpost
- Change gears for D.P. and module thread
- Driving plate
- Quick change tool post
- Digital Readout (DRO)
- Hydraulic copying attachment
- Chip guard
- ID/OD grinder
Download PDF brochure
Updated by rh at Dec 30, 2008 09:03 AM