EISEN MACHINERY

2030CY / 2040CY / 2060CY / 2080CY

Features

• 20” swing. 30”, 40”, 60” or 80” distance between centers
• 3 3/16” spindle bore
• Rapid traverse at longitudinal & cross feeds
• Multi-start thread cutting capability (9 variations). This is a rare feature on conventional lathes.
• Multi-disc friction clutch in headstock
• Heavy cast-iron construction
• Overload feed clutch and auto feed stop
• Full length brake
• 24 speed changes, 9 to 1,600 rpm.
• Hardened & ground gears in headstock
• Four large spindle bearing supports in headstock
• Hardened and ground bed ways

Massive Headstock

15" Extra Wide Bedways

EISEN 2000CY Series Specifications

Model Number	2030CY	2040CY	2060CY	2080CY
Swing over Bed	20” (500mm)
Swing over Cross Slide	12” (300mm)
Swing over Gap	28” (710mm)
Distance between Centers	30” (760 mm)	40” (1000 mm)	60” (1500 mm)	80” (2000mm)
Width of Bed	15 3/8” (390mm)
Spindle Nose	D1-8
Spindle Bore	3 3/16” (82mm)
Taper of Spindle	M.T.#6
Spindle Speed	9 ~ 1600 rpm (24 steps)
Spindle Max. Torque Output	1084 lb-ft (1470 NM)
Inch Threads	1/8 ~ 72 TPI (46 kinds)
Metric Threads	0.5 ~ 224mm pitch (47 kinds)
Module Threads	0.5 ~ 112mm
Diametral Pitch Threads	56 ~ 1/4 DP
Longitudinal Feed Range	0.00102” ~ 0.253” /rev
Cross Feed Range	0.00043” ~ 0.10078” /rev
Cross Slide Travel	13 3/8” (340mm)
Top Slide Travel	5 11/16” (145mm)
Logitudinal Rapid Traverse	18 ft/min (5.4 m/min)
Cross Rapid Traverse	7.55 ft/min (2.3m/min)
Leadscrew Pitch	2 TPI
Quill Diameter	2.95” (75mm)
Tailstock Quill Taper	M.T. #5
Quill Travel	6” (150mm)
Main Motor	10 HP (7.5 kw) 3 phase
Coolant Pump	90 watt (5.5 gallon /min)
Net Weight	3968 lbs	4 630 lbs	5300 lbs	6172 lbs
Gross Weight	5291 lbs	6160 lbs	6172 lbs	8377 lbs
Packing Dimension (LxWxH )	98” x 45” x 67”	108” x 45” x 67”	128” x 45” x 67”	148” x 45” x 67”

Standard Accessories

1. Center sleeve
2. Threading dial indicator
3. MT#5 dead center
4. Coolant system
5. Operation manual
6. Worklight
7. Leveling screws and pads
8. Toolbox with tools

Optional Accessories

1. 3-jaw scroll chuck
2. 4-jaw independent chuck
3. Four-way tool post
4. Quick change tool post
5. Chuck cover
6. Driving plate
7. Face plate
8. Steady rest 11” (bearing type)
9. Follow rest
10. Micro carriage stop
11. Turret carriage stop
12. Live center
13. Full length splash guard
14. Digital Readout (DRO)
15. Taper turning attachment

Posted by rh at August 21, 2005 06:17 PM