2000W / 2200W / 2600W Series
2000W / 2200W / 2600W Series PRECISION HEAVY DUTY LATHES
STRUCTURAL FEATURES
- The slideways between the saddle and bed are TURCITE B coated, which reduces the friction, reduces power consumption and providers smoother manual operation.
- The cross slide is induction hardened to 52 HRC and precision ground.
- Hardened and precision ground gears and bedways.
RIGID AND LOW NOISE HEADSTOCK
Headstock gears are made of Cr-Mo (Chrome Molybodenum) steel that underwent heat treatment and ground machining. Proper backlash value are adjusted to ensure high accuracy, high strength and low noise.
HIGH RIGIDITY SPINDLE
The spindle is mounted on three-point support, which consists of high precision taper roller bearings to endure radial and axial load. The spindle is designed with optimum bearing span analysis and proper preload arrangement to maintain spindle stiffness and lower thermal displacement.
METRIC / INCH GEARBOX
No need to replace change gears when switching between inch system and metric system.
TWO STEP FEED TAILSTOCK
Rigid tailstock structure and clamping mechanism are the result of design emphasis on heavy duty cutting load. Dual speed feed is suitable for various thrust force from different axes.
The over-travel limit device prevents tailstock quill from falling.
ANTI – WEAR SLIDWAYS
Slide ways of saddle and cross-slide are applied with “Turcite B” coating and hand scraped; slide ways of bed are treated with ground and induction hardening to assure high accuracy and lower wear rate.
ROBUST BED
Bed width of 400mm(16 1/8”) and wide front slide way increase contact area to distribute cutting stress and reduce wear rate.
h3. SPECIFICATIONS
| DESCRIPTION | 2000W | 2200W | 2600W |
| Swing over Bed | 20” | 22” | 26” |
| Swing over Cross Slide | 13” | 14” | 17 5/16” |
| Swing over Gap | 26-3/8” | 29-3/8” | 33-1/4” |
| Length of gap in front of face plate | 7-1/16” with D1-8 / 6-1/2” with D1-11 | ||
| Distance between Centers | 40"/60”/80”/100”/120”/160” | ||
| Center height | 10” | 11” | 13” |
| Spindle Nose | D1-8 or A1-8(Standard) / D1-11 or A1-11(Optional) | ||
| Spindle Bore | 3-1/8”(Standard) / 4-1/8” for 22”&26”(Optional) | ||
| Taper of Spindle | No. 7/No. 5 (Standard) / No. 8 /No. 5 (Optional) | ||
| Spindle Speeds | 12 Steps | ||
| Spindle Speed Range | 20~1550 rpm(Standard ) / 15~1500rpm for 22”/26” (Optional) | ||
| Metric Threads | 60 choices, between 0.2 ~ 14 mm pitch | ||
| Inch Threads | 60 choices, between 2 ~ 112 TPI | ||
| Diameter Pitch (DP) Threads | 50 choices, between 4~ 112 D. P. | ||
| Module Pitch (MP) Threads | 50 choices, between 0.2~ 7 M.P. | ||
| Longitudinal Feed Range | 50 selections, between 0.0014”~ 0.0387” / rev | ||
| Cross Feed Range | 50 selections, between 0.0007”~ 0.01935”/rev | ||
| Cross Slide Travel | 12-1/2” | ||
| Compound Slide Travel | 10” | ||
| Leadscrew Diameter and Thread | 1-1/2”/ 4 T.P.I. | ||
| Width | 400mm (15 3/4") | ||
| Taper of Center | M.T. # 5 | ||
| Quill Diameter | 2-15/16” | ||
| Quill Travel | 6-5/16” | ||
| Main Motor | 10 HP, 3ph(Standard) / 15 hp, 3ph (Optional) | ||
| Coolant Pump | 1/8 HP | ||
Standard Accessories:
- Tool box with toolkit
- Coolant system
- Touch-up paint
- Gears for module & D.P cutting
- Center sleeve
- Parts list & manual
Optional Accessories:
- 3-jaw scroll chuck
- 4-jaw independent chuck
- Drive plate
- Face plate
- Steady rest
- Follow rest
- Full length splash guard
- Quick-change tool post
- Live center
- Taper turning attachment
- Halogen work light
- Micro carriage stop
- 4-position carriage stop
- 4-way tool post
- Drill chuck and arbor
- Digital Readout (DRO)