| EISEN 1440GVS Variable Speed Lathe Specifications |
| Swing over Bed | 14” |
| Swing over Cross Slide | 9” |
| Swing in Gap | 21” |
| Distance Between Centers | 40” |
| Width of Bed | 10” |
| Spindle Nose | D1-4 |
| Spindle Bore | 1 9/16” |
| Spindle Taper | MT #5 |
| Spindle Speed | LOW 30 ~ 360 rpm HIGH 160 ~ 2500 rpm |
| Inch Threads | 4 ~ 112 TPI (40 kinds) |
| Metric Threads | 0.25 ~ 6.0 mm (20 kinds) |
| Module Pitch Threads | 0.25 ~ 3.0 M.P. (optional) |
| Diameter Pitch Threads | 8 ~ 112 D.P. (optional) |
| Longitudinal Feed Range | 0.002”/rev ~ 0.04”/rev |
| Cross Feed Range | 0.001”/rev ~ 0.02”/rev |
| Leadscrew Diameter (Pitch) | 1” (4 TPI) |
| Cross Slide Travel | 8 1/16” |
| Compound Slide Travel | 3 3/4” |
| Tool Block Capacity | 3/4” x 3/4” |
| Tailstock Center | MT #3 |
| Tailstock Quill Travel (Diameter) | 4 1/4” (1 1/2”) |
| Main Motor Power | 5 HP 3ph |
| Coolant Pump Power | 1/8 HP 3ph |
| Net Weight | 2244 lbs. |
| Gross Weight | 2800 lbs. |
| Packing Measurement approx. (L x W x H) | 78” x 30” x 60" |
