1340 E / 1440E
Features
- Hardened and ground bed ways
- Hardened and ground gears in headstock
- D1-4 camlock spindle with 1 9/16" spindle bore
- Spindle speed up to 2,000 RPM
- 3HP main motor
- Precision taper rollers bearing
- Rapid foot-operated brake
- Oil bath headstock, gearbox and apron lubrication
| Specifications | ||
| Model | 1340E | 1440E |
| Swing over Bed | 13" | 14" |
| Swing over Cross Slide | 7 3/4" | 8 3/4" |
| Swing in Gap | 19 3/4" | 20 3/8" |
| Distance between Center | 40" | |
| Width of Bed | 7 1/2" | |
| Spindle Nose | D1-4 | |
| Spindle Bore | 1 9/16" | |
| Taper of Spindle | M.T.#5 | |
| Spindle Speeds | 9-Step, 82 ~ 2000 rpm (Optional 18-Step with 2-speed motor, 40 ~ 2000 rpm) | |
| Leadscrew Diameter | 15/16" | |
| Leadscrew Pitch | 4 TPI | |
| Inch Threads | 3 ~ 56 T.P.I (32 kinds) | |
| Metric Threads | 0.4mm ~ 7.2mm (30 kinds) | |
| Longitudinal Feed Range | 0.0026" ~ 0.0638"/rev | |
| Cross Feed Range | 0.0013" ~ 0.0319"/rev | |
| Cross Slide Travel | 6 7/8" | |
| Compound Slide Travel | 4" | |
| Tailstock Quill Diameter | 1 9/16" | |
| Tailstock Quill Taper | M.T. #3 | |
| Quill Travel | 4.65" | |
| Main Motor | 3 HP 3ph | |
| Coolant Pump | 1/8 HP 3ph | |
| Net/Gross Weight | 1320 lbs / 1540 lbs | 1364 lbs / 1584 lbs |
| Packing Measurement Approx(Lxwxh ) | 73"x30"x58" | |
Standard Accessories
- 3 HP main spindle moor
- Complete coolant system
- 3-jaw 6" chuck
- Back plate for 3-jaw chuck
- 4-jaw 8" chuck
- Back plate for 4-jaw chuck
- Rapid foot brake
- 4-way toolpost
- Rear splash guard
- 10" face guard
- Center sleeve (MT#5 x MT#3)
- Center (MT#3)
- Toolbox & tool kit
- Steady rest
- Follow rest
- Parts list & manual
Optional Accessories
- 3-jaw 8" chuck
- 4-jaw 10" chuck
- Drive plate
- Face plate (12")
- Rear tool post
- Quick-change tool post
- Live center (M.T. # 4)
- Taper turning attachment
- Halogen Work light
- Micro carriage stop
- 4-position carriage stop
- Drill chuck and arbor
- 5C collect closer
- Digital read out