| Specification |
| Table Size | 47.2"×23.6” (1200mm x 600mm) |
| Travel Ranges | 40.2"×24"×24” (1020×610×610mm) |
| Max. Table Load | 1870 lbs. (850 kg) |
| Spindle Nose to Table Surface | 5.3" ~ 29.3” (135 ~ 745mm) |
| T-Slot (width x no. x distance) | 0.7” x 5×3.94” (18mm x 5×100mm ) |
| Tool Shank & Pull Stud | CAT40 |
| Spindle Inner Diameter | Ø 2.75” (70mm) |
| Spindle Center to Column | 26.6” (675mm) |
| Spindle Speed | 80 ~ 10,000 rpm |
| Draw Bar Force | 950 kgf |
| Rapid Feed Rate (X x Y x Z) | 984×954×787 inch/min (25×25×20 m/min) |
| Cutting Feed Rate (X x Y x Z) | 393.7 inch/min (10 m/min) |
| Spindle Motor (con./30 min) | FANUC α 12/8000 (15/20HP) |
| Servo Motor | FANUC α c12/2 1.34hp
|
| MAG Type | Arm Type |
| Tool Storage Capacity (pcs.) | 24 |
| Max. Tool Diameter | Ø3.03” (77mm) |
| Max. Tool Length | 9.8” (250mm) |
| Max. Tool Weight | 15 lbs. (7kg) |
| Air Requirement | 85 PSI (6 kg/cm2) |
| Voltage | 220V, 3ph, 60Hz |
| Power Requirement | 30 KVA |
| Machine Weight | 12786 lbs. (5800kg) |
| Floor Space (L x W x H) | 126×86.6×116.2” (3200×2200×2950mm) |
