TNC-20A CNC Turning Center
Features
- High rigidity and heavy cutting
- 30 Degree slant bed structure are easily for chip removals
- Easy operation
- Enclosed electrical cabinet
- Heat exchanger to maintain low temperature in electrical cabinet
- Programmable tailstock
- Separated coolant tank
| Swing over bed | ø 18.9" (480mm) |
| Swing over saddle | ø 11" (280mm) |
| Distance between center | 16.5" (420mm) |
| Cutting diameter | ø 9.8" (250mm) |
| Hydraulic chuck | ø 8" (210mm) |
| Bar diameter | ø 52mm (OPT 65) |
| Bed width | 14.2" (360mm) |
| Bed slant angle | 30° |
| Spindle nose | A2-6 |
| Spindle hole | ø 2.4" (62mm) |
| Spindle taper | 1:20 |
| Spindle speed | 40 - 4000rpm |
| Spindle motor | α P18, 9kw / 11kw |
| Spindle dia. (OD) | ø 4" (100mm) |
| Turret type | V8 |
| Tool station & size | 8, 25×25mm (OPT. 12, 20×20mm) |
| X travel | 5.9" (150mm) |
| Z travel | 15.8" (400mm) |
| Rapid trave | X: 15M/Min, Z:15M/Min |
| ID tool holder | ø 1.3" (32mm) |
| Tailstock stroke | 9.5" (240mm) |
| Quill stroke | 3.2" (80mm) |
| Tailstock diameter | ø 2.8" (70mm) |
| Quill taper | MT 4 |
| Servo motor (X) | α6 (1kw) |
| Servo Pump (Z) | α6 (1kw) |
| Coolant pump | 1/2 HP |
| Hydraulic motor | 2 HP |
| Power Requirement | 25 KVA |
| Packing size | 3350 x 2000 x 2050 mm |
| Gross weight | 4000 kgs |