CT-6 / CT-8 / CT-10 Turning Centers
 |  |  |
| CT-6 | CT-8 | CT-10 |
Features
6000 rpm High Precision Spindle
6,000 rpm High Precision Spindle
3 point support on spindle provide rigidity and reduce thermal distortion. The stability makes the spindle suitable for high speed high precision cutting as well as heavy cuts. High precision spindle features NSK 80BNC10DB bearings and is powered by 10 HP FANUC spindle motor
One-piece casting machine base provides rigid foundation for your most important high precision jobs.
Powerful 8 station servo-based tool turret can change tool in 0.3 seconds.
Laser calibration
X and Z axes repeatable within 2 micron
Heavy duty tailstock capable of micro adjustment
30° slant bed design
Sepcifications
| Model Series | CT-6 | CT-8 | CT-10 |
| Swing Over Bed | 15.75″ | 17.72″ | 26.38″ |
| Standard Turning Diameter | 7.87″ | 8.5″ | 11.42″ |
| Max Turning Diameter | 7.87″ | 12.6″ | 14.57″ |
| Max Turning Length | 6.73″ | 20.87″ | 22.05″ |
| Bar Capacity | 1.65″ | 2.05″ | 2.95″ |
| X Axis Travel | 4.33″ | 7.09″ | 7.28 + 1.97″ |
| Z Axis Travel | 7.87″ | 20.87″ | 24.02″ |
| Spindle Speed | 6000 rpm | 4000 rpm | 3000 rpm |
| Spindle Nose | 140F | A2-6 | A2-8 |
| Spindle Through Hole | 2.09″ | 2.48″ | 3.39″ |
| Spindle Bearing Inside Diameter | 3.15″ | 3.94″ | 5.12″ |
| Turret Type | 8 | 10 | 10 |
| Square Tool Height | 0.79″ | 0.98″ | 0.98″ |
| Boring Bar Holder Diameter | 0.79″ | 1.57″ | 1.57″ |
| Tailstock Stroke | 5.12″ | 17.13″ | 15.35″ |
| Tailstock Quill Diameter | 2.36″ | 3.54″ | 3.35″ |
| Tailstock Quill Taper | MT3 | MT5 | MT5 |
| Tailstock Quill Travel | 2.95″ | 3.94″ | 4.72″ |
| Rapid Feed Rate | 787″ | 787″ | 787″ |
| Rapid Feed Rate Z | 787″ | 945″ | 945″ |
| Spindle Motor | 10 HP | 15 HP | 25 HP |
| X Axis Motor | 1.6 HP | 0.8 HP | 3.8 HP |
| Z Axis Motor | 2.4 HP | 2.8 HP | 5.1 HP |
| Lubrication Motor | 1 HP | 2 HP | 2 HP |
| Coolant Motor | 0.3 HP | 0.5 HP | 0.7 HP |
| Turret Motor | 590 HP | 536.4 HP | 536.4 HP |
| Power Input | 13.1 KVA | 22 KVA | 31 KVA |
| Hydraulic Tank | 5.28 gallon | 13.2 gallon | 15.84 gallon |
| Lubrication Oil | 0.48 gallon | 0.48 gallon | 0.48 gallon |
| Coolant | 10.56 gallon | 52.8 gallon | 42.24 gallon |
| Length | 66.93″ | 72.83″ | 73.23″ |
| Floor To Spindle Center | 41.34″ | 43.31″ | 43.31″ |
| Floor Space | 90″x67″ | 93″x63″ | 110″x70″ |
| Net Weight | 5291 lbs | 9039 lbs | 12346 lbs |
| Gross Weight | 5512 lbs | 9480 lbs | 12787 lbs |
Standard Accessories
- 3-Jaw Chuck
- Hydraulic Unit
- Soft Jaw x 1 set
- Tailstock
- OD Tool Holder
- ID Tool Holder
- U-Drill Tool Holder
- ID Collets
- Chip Conveyor
- FANUC 0iMate CNC Control
Optional Accessories
- Automatic Door
- Bar Feeder System
- T12 Turret
- Collet Chuck
- Parts Loader